LIQUID SILICONE RUBBER MOLDING
TWO-SHOT MOLDING
CLEANROOM MOLDING
CUSTOM MEDICAL MOLDING

800-584-5662

RB67 SERIES ROUND CONTROL KNOBS

Round
Round with Deep Core (DC)
  • Material: ABS
  • Finish: Gloss or Matte
  • Shaft Configurations: Bushings and Set Screw(s)
  • Options: Decorative Inlay Style Top
  • Custom color matching and pad printed, hot stamped, or painted markings are available. Other materials and shaft configurations can be accommodated.
GroupShotLeft: RB67-2 Right: RB67-1-DC Shown with Spun Aluminum Inlay
Diagram1

Part# A B C D
RB67-0 .51/12.95 .48/12.19 .40/10.16 .045/1.14
RB67-1A .71/18.03 .40/10.16 .587/14.91 .045/1.14
RB67-1 .71/18.03 .58/14.73 .58/14.73 .045/1.14
RB67-2A .92/23.37 .64/16.26 .76/19.30 .11/2.79
RB67-2 .92/23.37 .76/19.30 .76/19.30 .11/2.79
RB67-3 1.25/31.75 .66/16.76 1.02/25.91 .115/2.92
in/mm, dimensional tolerances vary depending on material used and length of dimension
Diagram2

Part# A B C D
RB67-0-DC .51/12.95 .64/16.26 .40/10.16 .21/5.33
RB67-1-DC .71/18.03 .74/18.80 .58/14.73 .20/5.08
RB67-2A-DC .92/23.37 .86/21.84 .76/19.30 .33/8.38
RB67-2-DC .92/23.37 .98/24.89 .76/19.30 .33/8.38
RB67-3-DC 1.25/31.75 .85/21.59 1.02/25.91 .26/6.60
RB67-4A-DC 1.50/38.10 .86/21.84 1.32/33.53 .30/7.62
RB67-4-DC 1.75/44.45 1.04/26.42 1.53/38.86 .33/8.38
RB67-5-DC 2.25/57.15 1.07/27.18 2.02/51.31 .33/8.38
in/mm, dimensional tolerances vary depending on material used and length of dimension