LIQUID SILICONE RUBBER MOLDING
TWO-SHOT MOLDING
CLEANROOM MOLDING
CUSTOM MEDICAL MOLDING

800-584-5662

RB67 SERIES FINGER CRANK CONTROL KNOBS

Finger Tip Turn (FT)
Finger Dimple (FD)
Crank Turn (CT)
  • Material: ABS
  • Finish: Gloss or Matte
  • Shaft Configurations: Bushings and Set Screw(s)
  • Options: Decorative Inlay Style Top
  • Custom color matching and pad printed, hot stamped, or painted markings are available. Other materials and shaft configurations can be accommodated.
GroupShotLeft: RB67-5-FT Center: RB67-5A-FD Right: RB67-5-CT Shown with Spun Aluminum Inlay
Diagram1

Part# A B C D
RB67-3-FT 1.25/31.75 .66/16.76 .97/24.64 .11/2.79
RB67-4-FT 1.75/44.45 .82/20.83 1.13/28.70 .11/2.79
RB67-5-FT 2.25/57.15 .85/21.59 1.16/29.46 .11/2.79
in/mm, dimensional tolerances vary depending on material used and length of dimension
Diagram2

Part# A B C D
RB67-5A-FD 2.00/50.80 .63/16.00 1.84/46.74 .09/2.29
RB67-5-FD 2.25/57.15 .85/1.59 2.03/51.56 .12/3.05
in/mm, dimensional tolerances vary depending on material used and length of dimension
Diagram3

Part# A B C D
RB67-3-CT 1.25/31.75 .66/16.76 1.28/32.51 .11/2.79
RB67-4-CT 1.75/44.45 .82/20.83 1.43/36.32 .11/2.79
RB67-5-CT 2.25/64.01 .85/21.59 1.45/36.83 .11/2.79
in/mm, dimensional tolerances vary depending on material used and length of dimension