LIQUID SILICONE RUBBER MOLDING
TWO-SHOT MOLDING
CLEANROOM MOLDING
CUSTOM MEDICAL MOLDING

800-584-5662

RB67 SERIES DUAL CONCENTRIC CONTROL KNOBS

Dual Concentric
Dual Concentric with Deep Core (DC)
Dual Concentric with Skirt (SK)
  • Material: ABS
  • Finish: Gloss or Matte
  • Shaft Configurations: Bushings and Set Screw(s)
  • Options: Decorative Inlay Style Top
  • Custom color matching and pad printed, hot stamped, or painted markings are available. Other materials and shaft configurations can be accommodated.
GroupShotLeft: RB67-1+0 Center: RB67-1-SK+0 Right: RB67-1-SB-DC+0
Diagram1

Part# A B C D E
RB67-1+0 .71/18.03 .99/25.15 .58/14.73 .04/1.02 .50/12.70
RB67-1A+0 .71/18.03 .84/21.34 .59/14.99 .04/1.02 .35/8.89
RB67-2A+1 .92/23.37 1.15/29.21 .76/19.30 .11/2.79 .57/14.48
RB67-2+1 .92/23.37 1.27/32.26 .76/19.30 .11/2.79 .70/17.78
in/mm, dimensional tolerances vary depending on material used and length of dimension
Diagram2

Part# A B C D E
RB67-1-DC+0 .71/18.03 1.15/29.21 .58/14.73 .20/5.08 .66/16.76
RB67-2A-DC+1 .92/23.37 1.37/34.80 .76/19.30 .33/8.38 .79/20.07
RB67-2-DC+1 .92/23.37 1.49/37.85 .76/19.30 .33/8.38 .92/23.37
in/mm, dimensional tolerances vary depending on material used and length of dimension
Diagram3

Part# A B C D E
RB67-1-SK-7+0 1.15/29.21 1.19/30.23 .48/12.19 .20/5.08 .70/17.78
RB67-2A-SK-7+1 .52/38.61 1.40/35.56 .66/16.76 .25/6.35 .82/20.83
RB67-2-SK-7+11 .52/38.61 1.50/38.10 .66/16.76 .25/6.35 .95/24.13
in/mm, dimensional tolerances vary depending on material used and length of dimension